The Application Process
Do you need to learn about our process? Here you have some ideas.
296 Reynolds Bridge Road,
Thomaston (Connecticut)
(860) 361-6048
rrg@premiereindustriesllc.com
Family owned and Operated Thomaston (Connecticut)
(860) 361-6048
rrg@premiereindustriesllc.com
Creating lasting impressions for 3 generations.
There is no job too big or too small...
Aerial view of our plant.
OUR SERVICES
Excavation
Grading & Site Work
Water line Drainage
Septic System Inst.
Landscaping
Asphalt
Asphalt Driveways
Parking Lots
Asphalt Sidewalks
Asphalt Curbing
Asphalt Patching and Repair
Driveway Repair
Infrared Asphalt
Asphalt Sealing
Concrete/mo
Concrete Foundation
Concrete Sidewalks
Concrete Curbing
ASPHALT/DRIVEWAY
Procedure is as follows for your new asphalt driveway:
1 Remove existing material and haul off site to prepare for base.
2 Install approximately six inches of process stone, throughout the entire area, and compact with vibratory roller to insure full compaction.
3 SS-1 All areas that meet existing concrete or asphalt to insure adhesion.
4 Pave 3 inches of asphalt driveway mix throughout entire area, and compact with vibratory roller to insure compaction.
1 Remove existing material and haul off site to prepare for base.
2 Install approximately six inches of process stone, throughout the entire area, and compact with vibratory roller to insure full compaction.
3 SS-1 All areas that meet existing concrete or asphalt to insure adhesion.
4 Pave 3 inches of asphalt driveway mix throughout entire area, and compact with vibratory roller to insure compaction.
EXISTING DRIVEWAY W/BASE
Procedure is as follows for a finish grade and pave (Existing Driveway with a base):
1 Finish grade entire area, and compact with vibratory roller to insure full compaction.
2 SS-1 All areas that meet existing concrete or asphalt to insure adhesion.
3 Pave 3 inches of asphalt driveway mix throughout entire area, and compact with vibratory roller to insure full compaction.
1 Finish grade entire area, and compact with vibratory roller to insure full compaction.
2 SS-1 All areas that meet existing concrete or asphalt to insure adhesion.
3 Pave 3 inches of asphalt driveway mix throughout entire area, and compact with vibratory roller to insure full compaction.
RECAPING A DRIVEWAY
Paving over present driveway. It gives extra life to a driveway if caught in time, and it saves money in the long run.
1-Sweep and Clean the entire area.
2-SS-1 All areas so new asphalt adheres to existing asphalt.
3-Pave 2" asphalt class two and compact with vibratory roller.
1-Sweep and Clean the entire area.
2-SS-1 All areas so new asphalt adheres to existing asphalt.
3-Pave 2" asphalt class two and compact with vibratory roller.
